Ultra Topcoat is a quick drying and glossy acrylic modified alkyd topcoat that contains aromatic solvents. To be used as topcoat on steel and other metal constructions with high gloss and colour retention demands.
- Gloss finish with good gloss retention
- Fast drying
- Application Method Airless / Conventional Spray, Brush or Roller
- Surfaces Marine / Industrial Structures
- VOC Level 411g / Litre
- Coverage 12.8m² / Litre
- Touch Dry 30 Minutes @ 10°C / 15 Minutes @ 40°C
- Over-Coating 4 Hours @ 10°C / 2 Hours @ 40°C
- Maintenance Cycle 4 Years
- Thinning & Cleaning Jotun No.7
- Number of Coats 2
- Additional Information
Surface Preparation: All surfaces should be clean, dry and free from contamination. The surface should be assessed and treated in accordance with ISO 8504.
Coated surfaces: Clean, dry and undamaged compatible primer. Contact us for more information.
Other surfaces: The coating may be used on other substrates. Please contact us for more information.
Typical Paint System: Pilot QD Primer 2 x 40 μm (Dry Film Thickness) followed by Ultra Topcoat 1 x 35 μm (Dry Film Thickness).
Other systems may be specified depending on area of use.
Typical Use:
Marine: Recommended for engines, topside, deck and superstructure.
Protective: Suitable for a wide range of industrial structures.
Application:
Spray: Use airless spray or conventional spray.
Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness.
Roller: May be used. Care must be taken to achieve the specified dry film thickness.
Customer reviews for
Jotun Ultra Topcoat - RAL Colours
The are currently no reviews for this product
Please login to review this product.