These welders anti fatigue mats have a specially formulated SBR rubber surface that repels sparks and hot metal shards.
This surface material has a melt point of over 260⁰ Celsius.
The Nitrile enhanced Nitricell sponge base absorbs repeated compression and bounces back to its original form better than any PVC sponge alternative.
Accept no substitutes in your critical welding applications!
Anti-Fatigue floor mats can increase worker productivity, reduce slips, trips and falls and improve the overall health of your employees.
The mats are machined bevelled (sloped edge) on all four sides. This allows for a smooth transition on and off the mat and do not pose a tripping hazard.
- "Best" Sponge base
- NFSI Certified
- Machine cut and bevelled edges prevent tripping
- Melt point of over 260⁰ Celsius
- Available in 1" (25 mm) and 11/16" (17mm) thick
- Need a different size? 1’ (30.5cm) incremental lengths are available
Specifications
| Suitable Environment |
Dry |
Product Type |
Mat |
| Customisation Level |
C3 - Full Custom (Length, Width, Shape) |
| Solid or Drainage |
Solid |
| Compound |
Natural Rubber Surface |
| Recycled |
>20% |
| Warranty |
4 Years |
Test Result
| Flammability |
MVSS 302 / 'A'; Rating |
Taber Abrasion |
Federal Standard 191 / 1% lost @ 1,000 cycles |
| Temperature Range |
260 C Melt Point |
| Coefficient of Friction |
ASTM F1677 / Dry: COF = 1.10 / Wet COF = .32 |
| Compression Deflection |
ASTM D575 / Deflection @ 35 psi, mm=7.85 |
| Tear Strength |
Not Available |
| ESD Rating |
Not Available |
| Dielectric Strength |
Not Available |
Customer reviews for
Welders Anti-Fatigue Safety Mats 910mm x 610mm
The are currently no reviews for this product
Please login to review this product.