This is a wet grinder of tungsten electrodes that ensures precise grinding at the correct angle and perfect centring of the tip of the electrode. It grinds down to 8 mm which results in minimal electrode waste.
Highlights
- Sealed grinding chamber with dust collector to protect the user
- Variable angle setting gives more flexibility
- Wet grinding prevents overheating of the electrode during grinding
- High grinding speed provides faster grinding and a smooth surface
- The electrode holder ensures centring of the tip and reduces waste
- Less electrode waste results in a short payback time
Package Includes
- Grinder complete with table, diamond disc and grinding liquid
- Electrode holder
- Electrode clamps for Ø1.6, 2.4 and 3.2 mm electrodes (clamps are available for other electrode sizes)
Ultima-TIG is CE marked and meets all current EU regulations
Applications
- Orbital welding
- Robot/automated welding
- Field welding
- Plasma welding
- Manual welding
Environmentally Friendly & Safe
Ultima-TIG is the environmentally friendly wet grinder of Tungsten electrodes for TIG welding, with minimal wastage of the expensive electrodes. Ultima-TIG is constructed with a unique disposable container that automatically collects the toxic dust particles and ensures safe disposal.
Wet Grinding
The combination of liquid for cooling and a high grinding speed of the diamond disc results in a polished and even surface of the Tungsten electrode. In addition, the cool wet grinding shortens the grinding time and prevents overheated and damaged electrodes.
Cost-Effective in High-Quality
Ultima-TIG’s unique construction reduces the waste of expensive Tungsten electrodes and reduces the time spent on grinding, resulting in a short payback time. The variable angle adjustment and unique clamping system centres the electrode, so that the grinding is carried out in the correct longitudinal direction of the electrode. A precise angle is not only important for the quality of the welding seam; the number of re-ignitions between re-grinding is also increased.
Simple Operation
Set the variable angle setting at the desired angle. Place the electrode in the electrode holder and tighten it in the stick-out. Insert the electrode holder, turn on the grinder and rotate the electrode holder until grinding is finished. After grinding, flatten the tip by placing the angle adjustment in the 90° position, if needed.
New Engine Control with
- Service indicator
- Overload protection
- Readout the number of grindings
Specifications
| Motor |
110V-50/60 Hz / 220V-50/60Hz |
| Motor effect |
280W |
| Motor speed |
6000 rpm |
| Grinding speed |
31 m/sec. |
| Electrode size |
Ø0.8 – 4 mm |
| Min. length |
15 mm standard (8 mm with special clamps) |
| Angles |
7.5° – 90° grinding angle (equal to 15° – 180° tip angle) |