This is a wet grinder of tungsten electrodes with a cutting module that ensures precise grinding at the correct angle and perfect centring of the tip as well as precise and safe cutting of the electrode.
Highlights
- Safe cutting without the electrode splitting
- Sealed grinding and cutting chamber with dust collector to protect the user
- Variable cutting length and angle setting gives more flexibility
- Wet grinding prevents overheating of the electrode during grinding
- High grinding speed provides faster grinding and a smooth surface
- The electrode holder ensures centring of the tip and reduces electrode waste
- Less electrode waste results in a short payback time
Package Includes
- Complete grinding and cutting machine including table, diamond discs and grinding liquid
- Electrode holder
- Electrode clamps for Ø1.6 – 2.4 – 3.2 mm electrodes for grinding
- Electrode clamps for Ø1.6 – 2.4 – 3.2 mm electrodes for cutting (Clamps are available for other diameters)
Ultima-TIG-Cut is CE marked and meets all current EU regulations.
Applications
- Orbital welding
- Robot/automated welding
- Field welding
- Plasma welding
- Manual welding
Environmentally friendly and safe
Ultima-TIG-Cut is an environmentally friendly wet grinder and cutter of Tungsten electrodes for TIG welding, with minimal waste of the expensive electrodes. Ultima-TIG-Cut is constructed with a unique disposable container that automatically collects the toxic dust particles and ensures safe disposal.
Cutting
The cutting module has many setting options, which ensures the precise length needed. Ultima-TIG-Cut makes it simple to make electrode tips with the exact angle and precise length for use in any specific TIG welding job, including robotic and orbital welding.
High quality
Variable angle setting and unique clamping system centres the electrode so that the grinding is carried out correctly in the longitudinal direction of the diamond disc´s running surface. A precise angle of the electrode tip is crucial for weld quality and it increases the number of re-ignitions so that the electrode life is extended.
Simple operation
It is possible to grind and cut the electrode without removing the electrode from the holder. Hence, handling is very simple. Adjust the grinding angle and length once, and produce the same electrode tip again and again.
New engine control with
- Service indicator
- Overload protection
- Readout the number of grindings
Specifications
| Motor |
110V-50/60 Hz, 220V-50/60Hz |
| Motor effect |
280W |
| Motor speed |
6000 rpm |
| Grinding speed |
31 m/sec. |
| Electrode size |
Ø0.8 – 4 mm |
| Min. length |
15 mm standard (8 mm with special clamps) |
| Angles |
7.5° – 90° grinding angle (equal to 15° – 180° tip angle) |